Other capacities and configurations available – please contact us with any questions.
AnyLoad A1A Load Cell Amplifier Features:
ANYLOAD A1A strain gage amplifiers provide load cell and transducer signal conditioning. They are best used for single ended operation: ie. tension or compression (transitioning between the two is possible for about half of the span of the amplifier). The AnyLoad A1A-22 strain gage load cell amplifier is DC powered and can drive up to 4 x 350Ω load cells or 8 X 700Ω load cells and can be connected directly to 1 load cell or connected to several load cells through a junction box. Housed in an aluminum casting enclosure, the A1A amplifier has 2 through holes for easy installation and a wide output signal of 0V-10V or 4mA-20mA.
AnyLoad A1A Load Cell Amplifier General Specifications:
|Load Cell Type||All strain gage types|
|Power Supply||24V DC ± 10%|
|Excitation Voltage Output||12V DC|
|Input Range||0mV- 30mV|
|Maximum Input Voltage (DC)||30V|
|Maximum Output Signal Range||-2V-12V|
|Total Error||0.2% of full scale|
|Enclosure Material||Aluminum casting|
AnyLoad A1A-22 Load Cell Amplifier Datasheet’s
AnyLoad A1A-22 Load Cell Amplifier Manual