Description
Disk compression type load cell for applications such as weigh scale, hopper, tank level, truck/vehicle scale, and force measurement. These disk
load cells are used to measure compression or tension (threaded version) and have enhanced resistance to side loads and bending moments.
Other alloy steel disk load cell capacities and configurations available – please
contact us with any questions.
AmCells LPD disk load cells are compatible replacements for the following load cells:
Revere RLC series, Teda 220/230, and Vishay Celtron LCD series.
- High Grade Alloy Steel
- Low Profile Disk Load Cell With Base
- Meets OIML and HB44 Class III Standards
-
Cable Length: 20 ft.
- Rated Output (R.O.): 4.0 MV/V ± 0.25%
- Zero Balance: ± 2% of R.O.
- Non-Linearity: 0.03% of R.O.
- Hysteresis: 0.02% of R.O.
- Non-Repeatability: 0.05% of R.O.
- Creep (1 Hour): 0.02% of Load
- Insulation: > 5,000M Ohm
- Input Impedance: 385 ± 30 Ohm
- Output Impedance: 350 ± 4 Ohm
- Safe Overload: 150% of F.S.
- Ultimate Overload: 300% of F.S.
- Compensated Temperature Range: -10 to +40 °C
- Operating Temperature Range: -40 to +80 °C
- Temperature Effect on Output: 20 ppm/°C of load
- Temperature Effect on Zero: 20 ppm/°C of F.S.
CAPACITY (lb) | A | B | C | D | E | F | G | H | I | J |
1.5K — 10K | 0.28 | 0.41 | 0.30 | 3.50 | 1.30 | 0.63 | 1.75 | 1.25 | 0.75 | 4.12 |
25K — 50K | 0.34 | 0.51 | 0.40 | 4.00 | 1.60 | 0.88 | 2.12 | 1.87 | 0.94 | 4.75 |
100K | 0.41 | 0.63 | 0.40 | 4.60 | 2.00 | 0.88 | 2.12 | 2.00 | 1.14 | 5.50 |
Units are in inches. | ||||||||||
|
Pinout : Red +Excitation, Green +Signal, Black -Excitation, White -Signal | ||||||||||
Reviews
There are no reviews yet.