Tacuna Systems EMBSGB200 Load Cell Amplifier
The Tacuna Systems EMBSGB200 load cell amplifier is a low cost output signal booster for strain gauge sensors. It features factory-calibrated gain settings for ease of use. This amplifier completes a single quarter or half Wheatstone bridge. It also accepts a full bridge; in full bridge mode it amplifies any standard load cell. It can be embedded in any application, or is available with optional enclosure for standalone use.
The EMBSGB200 amplifier’s outstanding performance has made it a top-rated bestseller.
For a quick comparison of this product to our other amplifier products, see our Load Cell Amplifier Comparison Table in our Knowledge Base.
| Quantity | Price |
|---|---|
| 1 - 9 | $99.95 |
| 10 - 24 | $94.95 |
| 25 - 49 | $91.95 |
| 50 - 99 | $88.96 |
| 100 + | $84.96 |
Tacuna Systems EMBSGB200 Load Cell Amplifier Features
The Tacuna Systems EMBSGB200 offers three versions: -M, -C and -X. The C version offers manual gain and offset adjustment from a gain select DIP switch. The M version also has manual gain and offset from an offset adjust potentiometer. The X version controls gain and offset programmatically through an RS232 port.
All versions of this strain gauge amplifier easily interface with your microprocessor, analog-to-digital converter (ADC), or programmable logic controller (PLC) for reliable strain signal measurements. Accessories for all versions are at this link.
- Amplified analog voltage output 0-5V range
- Optional enclosure (small profile 1″ x 3″)
- Gain: 110, 220, 550, 1100, 2200, 5500, 11000
- Precision gain 0.1% tolerance
- Unipolar operation that eliminates the need for a bipolar data acquisition device
- Ability to handle low bridge resistances (down to 10 ohms in special cases)
- Vibration-resistant circuitry for harsh environments (no low voltage piezoelectric effects)
- Noise elimination (factory customizable upon request); Factory default low-pass: -3 dB at∼75 Hz with 350 bridge
- Ability to interface directly with any analog LabVIEW DAQ or other DAQ systems
- Upgradable firmware via RS-232 bootloader (X version)
Tacuna Systems EMBSGB200 Load Cell Amplifier Applications
- Strain gauge measurement
- Load cell measurement
- Bridge sensor amplifier
- Thermistor measurement
- General differential amplifier
Available Options: EMBSGB200-M (Manual gain and offset); EMBSGB200-C (Manual gain and offset with 4-20mA output); EMBSGB200-X (Programmable gain and offset via RS-232 port)
Contact us with any product-related questions.
Tacuna Systems Commitment
We strive to help our diverse customer base achieve their desired outcomes. As a small business, we take great pride in providing free consultation for product design & prototyping to ensure our valued clients have the right equipment to be successful. Our engineering specialists have extensive R&D experience in strain gauge load cell technology, and we are well-known for our in-house designed customizable signal conditioners and amplifiers.
Specifications
Tacuna Systems EMBSGB200 Load Cell Amplifier
On-Board Bridge Completion Circuit
- Contains mounting holes
- Bridge resistors can be through hole or surface mount
- Surface mount option allows placement of 0805 package resistors
- Through hole resistors can be soldered in place or plugged into provided socket
- Completion resistors sold separately
Anti-Aliasing and Noise Elimination Filters
- Factory Default: -3dB at 70Hz C and M versions
- Customizable to your application upon request
Calibration Offset
- Use simple potentiometer to adjust for offset errors (C and M versions) or allow on-board microcontroller to handle this (X version)
Plug-In Connectors or Headers (Upon Request)
- Additional plugs available by clicking here
Technical Documents
EMBSGB200 PCB STEP File4 reviews for Tacuna Systems EMBSGB200 Load Cell Amplifier
Only logged in customers who have purchased this product may leave a review.
Ted Agerton –
I am currently using 9 of these boards. Chris Lange of Tacuna systems has been very helpful in assisting with setup, debugging, and tailoring the boards to my specific needs. I am using 8 of them to amplify quarter bridge strain gauges that get the resonant frequency of a vibrating tank. I am acquiring the data with LabView at 2000 samples per second. After some adjustments and tinkering, the boards are working flawlessly at 1000X gain with minimal noise. I am using a ninth board in full bridge mode to modify a digital hanging scale. The scales accuracy has gone from 100 grams to 0.6 grams and now connects to a computer instead of a small digital display. It rivals in precision and accuracy to scales costing many times more. I would highly recommend this product for your strain gauge amplification needs. Easy to use, relatively inexpensive, and highly sensitive and flexible.
Brendan Palmer –
At first I couldn’t tell if the chip would work for my application. After explaining my application to the technical support they not only told me it would work but helped me through every stage from purchasing to installation. They even followed up just to make sure that I was satisfied and happy with the way the chip worked.
If I needed another signal conditioner I would get this one without hesitation!
Sara Hashmi (verified owner) –
excellent little board! i needed to reduce signal noise in a very sensitive temperature-control experiment. after my keithley instruments failed i turned to tacuna systems to rebuild — glad i did!
Paul Brunkow (verified owner) –
Ordered this product as part of a research project at a university. Order was shipped promptly and the conditioner works as intended. The biggest plus here? Absolutely fantastic help! Chris Lange was able to walk me, an admitted and unrepentant amateur, through connections issues I had on my end and provide advice on the use of the product. He even accepted email photos of my set-up and consulted with engineers on his end to determine the best way to use the conditioner. Practically the same as having a knowledgeable technician right there in the lab with me.