Select Page

ANYLOAD A2A-D2 Load Cell Amplifier

ANYLOAD A2A-D2 strain gauge amplifier provides load cell & transducer signal conditioning. The A2A-D2 is a DC-powered amplifier that can drive up to 2 x 350Ω load cells when connected directly. Equipped with two options of excitation voltages 5VDC or 12VDC.

$205.95

SKU: AL-A2A Category:
Weight1.6 lbs

Key Features

The ANYLOAD A2A-D2 strain gauge amplifier provides load cell and transducer signal conditioning. It is 24V DC-powered, driving up to 2 x 350Ω load cells (directly connected) or 4 x 350Ω, 8 x 700Ω, 8 x 350Ω load cells through a junction box. The versatile A2A-D2 amplifier is now equipped with two options of excitation voltages (5VDC or 12VDC) to comply the desired requirements in various applications.

  • DC powered
  • Output signal of ±10V
  • Adjustable resistors
  • Installation clamp for mounting
  • Aluminum casting enclosure

Available options: A2A-D2

Please contact us with any load cell interfacing inquiries.

A2A-D2 Load Cell Amplifier Specifications
Load Cell TypeAll strain gauge types
CapacityUp to 2 x 350 Ω directly connected or 4 x 350 Ω or 8 x 700 Ω or 8 x 350 Ω through a junction box
Power Supply24V DC ± 20%
Input Range0±36mV
Maximum Power 4.35W
Output Voltage Signal0±10V
Output Current Signal4mA – 20mA (Adjustable ±20%)
Max. Input Offset Voltage50µV
Min. Common-mode Rejection Ratio (G=10)100dB
IP RatingIP66
Enclosure MaterialAluminum casting and preinstalled GORE breather vent with capacitive stainless steel screws
Excitation Voltage to Load Cell5V or 12V
Tare LimitShall not exceed 30% of full load
Operating Temperature Range-10 – 50 (°C) / 14 – 122 (°F)